1.Edge banding machine FK61 has the function of separation and solves the problem of hot melt glue polluting the board surface after gluing.
2.Digital temperature control and visual prompt are realized to ensure the best gluing effect, reduce waste and improve benefit.
3.High speed tracking this equipment adopts the high-end configuration of two knife tracking, even when the equipment is running at high speed, it can still achieve accurate tracking (chamfer / fillet) effect stably.
Product Description
Heavy Duty Automatic Edge Banding Machine FK61,this equipment has rich functions of high quality, can provide high quality edge sealing effect.The maximum feed speed of this machine can reach 23m/min, and the high efficiency production is further pushed to the maximum. Even in the face of high-quality large-scale orders, we can still face it calmly, and the delivery time is fast.
Parameter
| MODEL | FK53 |
|---|---|
|
Shape size
|
6500x900x1600mm
|
|
Edge tape thickness
|
0.4-3mm
|
|
Sheet length
|
≥150mm
|
|
Working air pressure
|
0.7Mpa
|
|
Conveying transmission
|
GPG motor
|
|
Total power
|
15KW
|
|
Feed rate
|
16-23m/min
|
|
Sheet thickness
|
9-50mm
|
|
Sheet width
|
≥60mm
|
|
PLC
|
Delta
|
|
Air cylinder
|
AirTAC
|
Accessories and Advantage
Pre-milling
After milling by milling mechanism, all kinds of defects on the machined surface can be removed, and the edge sealing can reach the best state.
Gluing system
Reasonable control of glue quantity, good thermal conductivity, stable operation, uniform coating, firmer adhesion and more perfect edge sealing effect.
Four pressure wheel pressing
Strong pressing force, edge banding is more suitable, scraping off the excess hot melt glue, making the glue line smaller and the edge banding effect more perfect.
Fast ending cutting
Fast cutting the front and rear edge banding, two saw blades are matched in front and back to achieve high precision and high efficiency.
The automatic oil filling system of the end aligning guide rail extends the service life of the equipment.
Fine trimming
The upper and lower sides of the edge banding are protruded from the upper and lower planes of the board, and the redundant edge banding is trimmed into an R-angle shape, so that the upper and lower edges of the edge banding are flush and smooth with the upper and lower surfaces of the board.
Double corner trimming
The edge fillet (chamfer) of plate is processed to make the four corners of plate smooth and beautiful.
Scraping
Remove the marks left by trimming knife and finish R fillet, pneumatic scraping.
Buffing
Throw away the excess glue mark to make the edge banding smoother and cleaner.
